1-866-494-4610

Johnson Controls TL-BRTRP-0 Portable Bacnet Router

Johnson Controls TL-BRTRP-0 Portable Bacnet Router
Images for general purposes only. Actual may be different than depicted.
Johnson Controls TL-BRTRP-0 Portable Bacnet Router

Johnson Controls TL-BRTRP-0 Portable Bacnet Router

SKU: TL-BRTRP-0
Usually Ships 1-2 Weeks
Rating:
$485.27 /ea
0
$0.00
0
$0.00
0

The Portable BACnet®/Internet Protocol to Master Slave/Token-Passing (MS/TP) Router (TL-BRTRP-0) routes information between BACnet/IP and MS/TP networks. It is intended to be used as an interface between the following applications:

  • FX CommPro BACnet software (running on your computer) and FX Field Controllers fitted with BACnet MS/TP communication cards.
  • FX-PCT software (running on your computer) and FX-PC Programmable BACnet Controllers.
  • Controller Configuration Tool (CCT) software (running on your computer) and BACnet Field Equipment Controllers (FECs)
The router electronics exist in a small portable case and are powered from the computer USB port; however, no USB drivers are needed. The router contains a 10/100 Mbps Ethernet Auto-Medium Dependent Interface Crossover (MDIX) port and an MS/TP compatible port. The MS/TP port offers a choice of EIA-485 connectors (an RJ-11 connector or a 3-pin terminal block with removable plug) and is optically isolated from USB power. The MS/TP port can address 127 devices. The MS/TP port also supports up to 32 devices on a single segment, and you can use repeaters to add additional devices or to extend bus length. All MS/TP baud rates are supported.

Following are the Attached files for this product:

Johnson Controls TL-BRTRP-0 Installation Instructions

Q & A: Ask the Questions, share answers

Do you have questions about this product?