1-866-494-4610

Johnson Controls V-3000-1 Pneumatic Valve Actuators Proportional Controls Spring Return 30 PSI 1/8" NPT

Johnson Controls V-3000-1 Pneumatic Valve Actuators Proportional Controls Spring Return 30 PSI 1/8" NPT
Images for general purposes only. Actual may be different than depicted.
Johnson Controls V-3000-1 Pneumatic Valve Actuators Proportional Controls Spring Return 30 PSI 1/8" NPT

Johnson Controls V-3000-1 Pneumatic Valve Actuators Proportional Controls Spring Return 30 PSI 1/8" NPT

SKU: V-3000-1
In Stock 91
Rating:
$93.17 /ea
Qty of 5 - $85.44 /ea
Qty of 10 - $80.52 /ea
0
$0.00
0
$0.00
0
Johnson Controls V-3000-1 Pneumatic Valve Actuators Proportional Controls Spring Return 30 PSI 1/8" NPT

The V-3000 Series Pneumatic Valve Actuators are designed to accurately position steam or water valve modulating plugs in response to a pneumatic signal from a controller. Two models of the V-3000 are available; the exposed model is for installation in a protected location and the enclosed model is for installation in a location where the actuator would be subjected to tampering. A V-9502 Valve Positioner can be ordered separately for use on the exposed model only in applications where sequential operation is desired or additional positioning power is necessary.

Construction
Both models of the V-3000 have a molded synthetic rubber diaphragm design. This molded diaphragm provides a constant effective area throughout the valve stem stroke. All parts are
protected by a sturdy die cast aluminum housing. The actuator assembly can be removed or repositioned by loosening a single set screw without disturbing the rest of the valve assembly.

Operation
With no control air pressure applied to the diaphragm, the valve is in the normal position. Spring and fluid forces in the valve combine to balance against the diaphragm pressure. Reducing the air pressure permits the valve spring to return the valve plug to its normal position.

Mounting
Both the exposed and enclosed V-3000 Actuators are easily field mounted to the valve bonnet with a single set screw. The V-3000 Exposed Actuator can also be ordered factory mounted to any of the V-3000 or V-4000 Series Valves (except V-3854). The V-9502 Valve Positioner can also be factory mounted on these units.
Max Control Pressure 30 PSI
Air Connection 1/8" NPT Barbed Fitting for 5/32" OD Polytubing
Ambient Operating Temperature Limits -20 to 150F (-29 to 66C)
Housing Material Die Cast Aluminum with Enamel Finish
Diaphragm Materal Synthetic Rubber

Following are the Attached files for this product:

Johnson Controls V-3000-1 Pneumatic Valve Actuators Data Sheet

Q & A: Ask the Questions, share answers

Do you have questions about this product?